The WinTV-HVR-1600 was used for this example, but any other
Hauppauge WinTV-HVR can be set up in the same way
Step 1: Open Media Center. Click Continue.
Step 2: In the Get Started screen, choose Express.
Step 3: Choose TV/Live TV setup.
Step 4: Your region will get automatically detected. Choose
yes to continue if it is displayed correctly, and click next.
Step 5: Enter your zip or postal code when prompted, and
click next to continue.
Step 6: Program guide terms, choose ‘I agree’ and click next
to continue.
Step 7: TV set up will indicate that it is downloading
program data.
TV setup will then examine TV signals
TV setup will then indicate your TV signal detection result.
If detected correctly, choose ‘yes configure TV with these results’ and click
next to continue.
Step 8: TV set up will now ask you to set up analog cable,
click next to continue.
Step 9: Choose your analog cable TV provider and click next
to continue:
Step 10: TV setup will now ask you to setup digital cable,
choose next to continue
Step 11: Choose your digital cable TV provider and click
next to continue:
Step 12: TV setup configuration will confirm your signal
setup, choose next to confirm:
Step 13: TV setup will now require you to download your TV
program guide.
Step 14: After the program guide data has completed, TV
setup will begin a TV channel scan process. This can take several minutes.
Channel scan will complete and display a list of the channels
found (digital QAM). Choose next to continue.
Step 15: TV signal setup will indicate that it is finished.
Click Finish.
